A 3-D Analytic Eddy Current Model for a Finite Width Conductive Plate
AbstractPurpose - A 3-D analytic modeling technique for calculating the eddy current distribution, force and power loss in a conductive plate of finite width and thickness is presented. The derived...
View ArticleLocally conservative projection methods: benchmarking and practical...
AbstractPurpose - This article presents a locally conservative projection method which aims to preserve the integral of a function and one operator among grad, div, or curl.Design/methodology/approach...
View ArticleA New Modeling Method for S-MCSRM Driven By Three-phase Full Bridge Converter
AbstractPurpose - The S-MCSRM is a two-phase excited SRM, with the short flux path and mutual inductance coupling, which is suitable for the oil submersible pump application owing to large torque and...
View ArticleAnalytical Modeling of Quantization Effects in Surrounding-gate MOSFETs
AbstractPurpose - The purpose of this paper is to present an analytical model and simulation for cylindrical gate all around MOSFTEs including quantum effects.Design/methodology/approach - To...
View ArticleSimulation of Linear Dynamic Macro Model of Photo Catalytic Sensor in Spice
AbstractPurpose - The Flow Injection Analysis (FIA) technique by Yoon-Chang Kim et al for the determination of Chemical Oxygen Demand (COD) involves the complete analysis including sampling and...
View ArticleSuper-Fast Multipole Method for Power Frequency Electric Field in Substations
AbstractPurpose - The purpose of this study is to calculate the frequency electric field in substation. Design/methodology/approach - In this paper, we propose a novel Fast Multipole Method (FMM)...
View ArticleAdjusted reactive solutions for multiple power flow computations
AbstractPurpose - The purpose of this work is that of showing some efficient techniques to perform PV-PQ node type switching in multiple power flow computations.Design/methodology/approach - Reactive...
View ArticleAnalysis of a Circular Microstrip Antenna on Isotropic or Uniaxially...
AbstractPurpose - In this paper, we propose an artificial neural network (ANN) in conjunction with spectral domain formulation for fast and accurate determination of the resonant frequency and quality...
View ArticleUWB signal receiver with sub-Nyquist rate sampling based on compressed sensing
AbstractPurpose - The purpose of this paper is to present a compressed sensing (CS) based sampling system for ultra-wide-band (UWB) signal. By exploiting the sparsity of signal, this new sampling...
View ArticleA New Electric Dipole Model for Lightning-Aircraft Electrodynamics
AbstractPurpose - - As commercial and military aircraft continue to be subject to direct lightning flashes, there is a great need to characterize correctly the electrical currents and electric...
View ArticleA new analytical approach to predicting cycle-slipping in charge pump PLLs
AbstractPurpose - The linear analysis presented for the charge pump phase locked loops becomes inaccurate or incorrect where cycle slipping occurs. In this paper, an analytical approach is proposed...
View ArticleDetailed and Comprehensive Mathematical Modeling of Flying-Capacitor Stacked...
AbstractPurpose - This study proposes a mathematical model for stacked multicell (SM) converters (SMCs), to be exploited in the analytic determination of natural voltage balancing dynamics of the...
View ArticleUnconditionally Stable Improved Meshless Methods for Electromagnetic...
AbstractPurpose - In this paper a modified meshless method, as one of the numerical techniques that has recently emerged in the area of computational electromagnetics, is extended to solving...
View ArticleMagnetic Separation of Magnetic Activated Carbons for Water Treatment and Reuse
AbstractPurpose - The aim of this paper is the study of the magnetic separation of pollutants from water by means of a magnetic filter. A Magnetic Activated Carbons nanometric powder which combines the...
View ArticleDiscrete Optimal Control for Robot Manipulators
AbstractPurpose - Applying discrete linear optimal control to robot manipulators faces two challenging problems, namely non-linearity and uncertainty. This paper aims to overcome non-linearity and...
View ArticleBi-Objective Sizing Optimization of Power Converter using Genetic Algorithms:...
AbstractPurpose - This paper focuses on the tradeoff between losses and converter cost.Design/methodology/approach - The continual development of power electronic converters, for a wide range of...
View ArticleMathematical Modeling of a Novel Bearingless Switched Reluctance Motor
AbstractPurpose - The novel Bearingless Switched Reluctance Motor (BSRM) is proposed recently, which is different from the conventional BSRM in the stator structure and suspension winding arrangement....
View ArticleFlexible Test Bed for the Behavioural Modelling of Power Amplifiers
AbstractPurpose - We focus on the Memory-Polynomial Model as Special case of Volterra Series, implemented in Hardware.The behavior of the MPM is fully proved through a comparison with AM-AM and AM-PM...
View ArticleImproving the performances of triangular microstrip antenna with multilayered...
AbstractPurpose - An improved analytical model is presented to investigate the scattering properties of high Tc superconducting triangular antennas in multilayered configuration. The spectral method is...
View ArticleDesign of Optimal Length Preview Controller
AbstractPurpose - This paper aims to determine the optimal Preview Length for the Preview State Feedback Controller and to design the static Preview Gains for the controller.Design/methodology/approach...
View ArticleModeling, analysis, and motor drive application of quasi-Z-source indirect...
AbstractPurpose - The paper proposes a new type of three-phase quasi-Z-source indirect matrix converter (QZSIMC), to extend the voltage gain for application in the induction motor...
View ArticleYet Another TOA Estimation Technique for IR-UWB
AbstractPurpose - In the present paper, we propose a new method for estimating the time of arrival (TOA) of ultra-wideband (UWB) signals under IEEE 802.15.4a multipath channel model....
View ArticleComputer-based modeling of moving cylindrical ferromagnetic billets induction...
AbstractPurpose - Nowadays, various software is available for simulating physical processes in induction heating. The software is often limited in its ability to simulate the billet movement, sometimes...
View ArticleFuzzy Logic Control to Improve the Performance of the Direct Power Control...
AbstractPurpose - A direct power control (DPC) of the doubly fed induction generator (DFIG) is presented. A new method, which is based on the rotation of the space sector, clockwise or vice versa, is...
View ArticleStochastic models for the evaluation of magnetisation faults
AbstractPurpose - The introduction of stochastic deviations due to production faults into the ?nite element (FE) simulation of electrical machines re quires suitable error-model. These models should...
View ArticleExtended Progress in TEAM Problem 21 Family
AbstractPurpose - The purpose of the paper is to give a review of TEAM Problem 21, focus on its extended progress in engineering-oriented developments, and report the new benchmarking activity...
View ArticleDetermination of the Weighted Mean Path Length of the Epstein Frame
AbstractPurpose - The purpose of this paper is to investigate the effects of the related factors on the mean path length of the Epstein frame,and propose a weighted method based on the different...
View ArticleFinite Element Modeling of Current Dipoles Using Direct and Subtraction...
AbstractPurpose - The resolution of EEG forward problem by the finite element method involves the modeling of current dipoles with the singularities. The purpose of the paper is to investigate the...
View ArticleA Quantum-Inspired Evolutionary Algorithm for Global Optimizations of Inverse...
AbstractPurpose - The purpose of this paper is to reports the investigations on the potential of a new evolutionary algorithm based on probabilistic models - the quantum-inspired evolutionary algorithm...
View ArticleMulti-Objective Optimization Approach to Reliability-Based Robust Global...
AbstractPurpose - The purpose of this paper is to propose a multi-objective optimization algorithm, which can improve both the performance robustness and the constraint feasibility when the uncertainty...
View ArticleAccuracy Evaluation of Three Dimensional FE Analysis Based on Nonconforming...
AbstractPurpose - Three dimensional mesh generation for shape optimizations needs long computational time. This makes it difficult to perform three dimensional shape optimizations. The purpose of this...
View ArticleThermo Inductive Non Destructive Testing method applied to CFRP
AbstractPurpose - In this paper, a thermo inductive Non Destructing Testing (NDT) modeling applied to Carbon Fiber Reinforced Polymer (CFRP) composite is presented.Design/methodology/approach - A...
View ArticleA Novel Two-port Network Model for RCPT System
AbstractPurpose - The purpose of the paper is to show that how a contactless power transmission system via electromagnetic (EM) resonantly coupling power transmission (RCPT) technology may be analyzed...
View ArticleEfficient Numerical Simulation of DC Potential Drop Signals for Application...
AbstractPurpose - Direct Current Potential Drop (DCPD) testing is a potential nondestructive testing method for quality control of the Metallic Foam (MF). The purpose of this paper is to develop a...
View ArticleCalculation and Validation of Iron Loss in Laminated Core of Power and...
AbstractPurpose - The purpose of this paper is to present a simple method to analyze the iron loss in the laminated core of power and distribution transformers. Design/methodology/approach - This paper...
View ArticleTime-Stepping Finite Element Analysis on the Influence of Rotational Flux on...
AbstractPurpose - The purpose of the paper is to study the influence of rotational flux on local core losses of the motors, which is difficult to distinguish the iron losses caused by rotational flux...
View ArticleAn Efficient Application of PML in Fourth-order Precise Integration Time...
AbstractPurpose - The purpose of the paper is to introduce a perfectly matched layer (PML) absorber, based on Berenger's split field PML, to the recently proposed low-dispersion precise integration...
View ArticleFinite Element Modeling and Analyzing for Lumbar Muscle Electrical Activity
AbstractPurpose - The purpose of the paper is to present a three-dimensional model and analyze the internal link between surface potential distribution and the electrical activity of lumbar muscles...
View ArticleExamination of Eddy Current in Laminated Core without Insulation
AbstractPurpose - In the laminated core of transformer, motor, etc., each electrical steel sheet is usually insulated in order to reduce the eddy current loss. Raw steel sheets without insulation are...
View ArticleA Split-Step-Scheme-Based Precise Integration Time Domain Method for Solving...
AbstractPurpose - This paper presents a modified precise integration time domain (PITD) method for the numerical solution of 2-D scalar wave equation.Design/methodology/approach - The split step scheme...
View ArticleSimplified Analysis of Iron Loss in Three-phase Transformer Considering...
AbstractPurpose - A simplified method for calculating iron loss of three-phase transformer is proposed in this paper. The rotating iron loss measured from 2-D vector magnetic property measurement...
View ArticleMinimizing Sidelobe Levels and Facilitating Null Placements of Nonlinear...
AbstractPurpose - The aims of this paper is to explore the potential of particle swarm optimization methods for minimizing the sidelobe levels and placing null at arbitrary angles of a nonlinear...
View ArticleStudies on Numerical Methodologies for Inverse Problems and Optimizations in...
AbstractPurpose - The purpose of this paper is to explore the potential challenges in developing numerical methodologies for inverse problems and optimizations.Design/methodology/approach - Summarizing...
View ArticleOn the Equivalence of Finite Difference and Edge Element Formulations in...
AbstractPurpose - Numerical three-dimensional formulations using vector potential A have been examined for magnetic fields, with emphasis on the finite-difference (FDM) and edge-element (EEM) methods,...
View ArticleInduced voltage Analysis of Superconducting Fault Current Limiter
AbstractPurpose - Saturated core type superconducting fault current limiter (SFCL) can effectively limit the short-circuit current in power system. However, the high induced voltage will occur between...
View ArticleResearch on Magnetostriction of Grain-Oriented Electrical Silicon-steel Sheet
AbstractPurpose - The magnetostriction of grain-oriented electrical silicon steel sheet is studied for the magnetic field direction along the rolling direction and deviating from it. The method of...
View ArticleVector Magnetic Property of Electrical Steel Sheet and its Influence on...
AbstractPurpose - The purpose of this paper is to present the vector magnetic properties of the electrical steel sheet, and investigate its influences on the magnetic field and iron loss distributions...
View ArticleMulti-Dipole Modeling of XLPE Cable for Electromagnetic Field Studies in...
AbstractPurpose - In this paper modeling of the XLPE cable for electromagnetic signature study at a far distance is proposed. Design/methodology/approach - Due to the very small ratio of the dimensions...
View Article
